A/C Compressor Fits Honda Accord 01-02 3.0L Acura TL CL 3.2L 99-03 77383

$104.99 Buy It Now or Best Offer
free,30-Day Returns

Seller Store ggautoair
(485) 96.4%,

Location: Hialeah, Florida
Ships to: US,
Item: 313757361829

Return shipping will be paid by:Buyer
Returns Accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money back or replacement (buyer’s choice)
Pulley Belt Type:Multi-Groove Serpentine
Manufacturer Part Number:R77383
Superseded Part Number:10349641, 1010520, 2041665, 78383, 2041668, 6512111, 7512111,
Clutch Maximum Diameter:5.000″ 6 Groove
G & G AUTO AIR COMPRESSOR:G & G AUTO AIR COMPRESSOR
Type:Compressor & Clutch Assembly
Interchange Part Number:1521605, 38810P8EA01, CS20115, 4710256, 4711256
OE/OEM Part Number:1521605, 38810P8EA01, CS20115, 4710256, 4711256
Manufacturer Warranty:3 Months
Compressor Drive Type:Belt Driven
Country/Region of Manufacture:United States
Universal Fitment:No
Pulley Groove Quantity:6

ABOUT OUR PRODUCTS We are a company specialize on remanufacture original compressor with clutch. Please check our Ebay store for more A/C parts SEE COMPATIBILITY We would appreciate if you could leave us a note with the vehicle specification (Year, Make, Model and Engine) in PayPal when making the payment or in the eBay email system, that way we can be sure that the a/c compressor will fit properly. RETURNSIf you are not 100% satisfied with your purchase, you may return the product unused for a full refund within 30 days from the date you purchased it. Other parts such as driers and valves will not be refundable unless returned unused. Parts that return used are going to be subject to inspection and the warranty terms applied. All return or exchange requested after 30 days of the purchase most be pre-approved and following all warranty terms and conditions. ( Buyer pays shipping both ways and we don’t warrantee full refund on used parts, see warranty terms below to have more details about it). WARRANTYThe warranty only covers the cost or replacement of the compressor. The warranty does not cover the cost of labor, removal, installation, or any diagnostic costs. The warranty over this item consist in a onetime replacement ( within 90 days of the purchase). To obtain a replacement, the compressor from the original purchase must first be sent in along with the order information and a copy of the certified mechanic’s invoice for us to inspect and determine if it will be covered under warranty. We can also offer an advanced warranty replacement. For that, a deposit fee of US $85 would be required, to ensure the return of the original compressor. This deposit would be reimbursed once the original compressor is received back but only if it meet the warranty terms after been inspected. So please before sending the compressor make sure to understand and read carefully, which damages are covered by our guarantee and which are not. (contact us directly for more details about the process to get the advance replacement) Warranty won’t cover compressors that return:Locked upContaminated with foreign debris, metal shavings, black oil or other liquid not compatible with the a/c system.Burnt coil and/or cut wires (connectors).Any alteration (parts changed) not made or approved by us.Any physical damage such as broken mount, pulley or bearing without previous notification. To prevent any issue with our compressor and avoid unnecessaries changes, a waste of time ,money and even put at risk the warranty we always recommend do the right job from the beginning following all proper installation procedure and by an AC certified technician. INSTALLATION INSTRUCTIONS FOR COMPRESSORS Please read the following information before installing this compressor The compressor you are ready to replace has failed for some reason, and it is important that you find out the cause of the compressor failure before installing our compressor, a step that allow you to avoid the pain of multiple replacement. 80% of the compressor fail because of a lack of lubricating oil or because of the blockage of the system. Remember, 60% of the oil in the refrigeration system should be in the compressor. So, if the total amount of oil in the system is 200 ML (6.76oz) then the compressor should have 130ML (4.39oz) of oil (our compressor already has 2oz on it). Because the refrigerants are circulating in the system with oil, and finally they flow back to the compressor. If the reason for the failure of the original compressor is that there is not oil or there is not enough oil, then the system has a leakage of refrigerant or a place to block, preventing the lubricating oil from flowing back to the compressor. The residue and blockage in the system prevent the normal oil from flowing back to the compressor during the day. If you don’t fix the leak and blockage, this compressor will also fail. Please follow these steps to install the compressor.Confirm the correct amount of refrigerants on board according to the requirements of OEM. If the refrigerating capacity of the car is insufficient, the amount of refrigerants should be increased. Refer specifically to OEM instructions.After the old compressor is taken down, drain out the oil in it. In this way, turn the compressor upside down and shake the position above the middle of the compressor to pour out the oil. Pour the used oil into a clean cup to see if there is any residue and stains in it. Both variable and Sanden compressors have an oil plug that should be removed before pouring oil.If the oil poured out of the old compressor is a thousand clean and has 60% or more of the OEM requirements, flush out remaining oil in the system. At this time, it is necessary to determine why the original compressor failed. *Did the clutch burn out? *Is the voltage output from the system to the clutch correctly?*Is the shaft seal of the compressor or gasket of the cylinder block leaking?If it is one of the above problems, then it is the compressor problem. If the condenser fan fails, it will cause the air flow to reach the condenser to weaken, so that the refrigeration system does not get the required heat.If there is not oil or not enough oil in the compressor, there may be a freon leak in the system, find the leaked part, fix it or replace it, and do not use sealant in the system.If the car is 1996 or updated point and there is dirt in the compressor oil or contains metal fragments, you need to replace the condenser. Rinse hoses and evaporators with soluble solvents, do not rinse with oily solvents, and ensure that the entire system is as clean as possible before installing the compressor. Next, make sure to add at least 3oz more of oil in our compressor, (ours have 2oz on it already). Before installing the compressor make sure that the system has the recommended amount of oil too. If the compressor has the amount of oil required but the system doesn’t have enough this will lead to compressor failure any wayIt takes at least 45 min to clean the system, a process that removes residual solvents and moisture. It does take you sometime to find out why the old compressor fail; however, it is important to determine the cause behind the failure. If the original problem is not corrected, then the refrigeration system will have the same problem, incorrect diagnosis and repair of the problem will waste your time and money. SHIPPING Shipping time estimate starts after one bussiness day for handling and packeging. All order are shipped during bussines hours( Monday-Friday 9:00 am to 5:00 pm) Shipping options:Free Standard Shipping (UPS Ground) delivery within one to five business days only available on US continental. Free Expedited Shipping (USPS Priority Mail®)Some compressors will not be available throuth this service. Delivery within one to three business days available in all US territory incluiding: Alaska/Hawaii,Puerto Rico and the U.S. Virgin Islands in the Caribbean Sea, Guam and the Northern Mariana Islands in the North Pacific Ocean, and American Samoa in the South Pacific Ocean. US $40.00 Expedited Shipping (UPS 2nd Day Air®) Only available on US continental. Our priority is to offer the best quality at the most affordable price.

Frequently Asked Questions About A/C Compressor Fits Honda Accord 01-02 3.0L Acura TL CL 3.2L 99-03 77383 in My Website

enneadeband.com is the best online shopping platform where you can buy A/C Compressor Fits Honda Accord 01-02 3.0L Acura TL CL 3.2L 99-03 77383 from renowned brand(s). enneadeband.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling A/C Compressor Fits Honda Accord 01-02 3.0L Acura TL CL 3.2L 99-03 77383 on enneadeband.com?

Frequently Asked Questions About A/C Compressor Fits Honda Accord 01-02 3.0L Acura TL CL 3.2L 99-03 77383 in My Website

What are the best-selling A/C Compressor Fits Honda Accord 01-02 3.0L Acura TL CL 3.2L 99-03 77383 on enneadeband.com?

Laisser un commentaire Annuler la réponse