CCIYU For 2004-06 Jeep Wrangler 4.0L Catalytic Converter Y-Pipe Kit Front Rear

$279.87 Buy It Now or Best Offer
free,30-Day Returns

Seller Store autoparts-1a
(417) 99.3%,

Location: Pomona, California
Ships to: US,
Item: 404181707361

Restocking Fee:No
Return shipping will be paid by:Seller
Returns Accepted:Returns Accepted
Item must be returned within:30 Days
CCIYU:CCIYU
Manufacturer Part Number:AP17091601P
Three way catalytic converter:Three way catalytic converter
Type:Catalytic Converter
Oxygen Sensor Location:Pre & Post Catalyst
Fitment Type:Direct Replacement
Notes:The most important external purification device
Holes:As Picture Shows
Body Material:Aluminum oxide
Carrier:Porous ceramic material or metal carrier
UPC:Does not apply
Items Included:As Picture Shows
Labels & Certifications:EPA
Property:The most important external purification device
Color:Silver
Insulation material:Asbestos Fiber Felt
Connection Type:Weld-on
Manufacturer Warranty:5 Years
Placement on Vehicle:Front, Rear
Features:No Drilling Required,Weld-on Connection,Clamp-on Connection
Conversion rate:99%
For:04-06 Jeep Wrangler Rubicon Sport Utility 2-Door 4.0L
Fits:2004-2006 Jeep Wrangler SE Sport Utility 2-Door
Surface Finish:Polished,Rust Protected
Light-off temperature:Up To Standard
Thermal stability:up to standard
Definition:The catalysis of vehicle exhaust into harmless gas
Catalytic Converter Location:In a special exhaust pipe
OE/OEM Part Number:twc,three way catalyst,three-way catalyst
Inspection:visual inspection,back pressure test,Vacuum test
Working principle:enhance gas activity,catalyze spray carrier
Vintage Part:Yes
Performance Part:Yes
Universal Fitment:No
Finish:Coated,Polished
Interchange Part Number:324236
Superseded Part Number:645174
Restricted States:California, New York, Colorado & Maine
Notice:If you are interested pl add to the shopping cart or send offer

Typical catalyst picture details: Product Information: The basic job of a catalytic converter is to eliminate unburned fuel and potentially dangerous compounds from the exhaust beFore they can reach the environment. If these toxic gases are not removed, then it can have dangerous effects on the environment. This device is specially designed to reduce the emissions of the vehicle and greenhouse gases. However, if the converter is not working properly, and some issue arises, then the effect is very clear that even the driver sitting inside can easily notice it. The converter focuses on reducing three compounds, which are: Hydrocarbons Hydrocarbons are the leftover compounds of gasoline, and if they are not burnt by the engine properly, then they can enter into the atmosphere causing serious effects. It can cause harmful clouds of smog to Form. Nitrogen oxide Nitrogen oxide is Formed by combining two Forces; oxygen and nitrogen, while the heat in engine is still running. It is a very bad gas For the environment. It causes smog and Forms a pool of cloud that falls on earth as acid rain. Carbon Monoxide Carbon monoxide is Formed by the heat of the engine during the work done. This gas is the most dangerous and poisonous, especially to the mammals who breathe oxygen – which include humans. The catalytic converter looks just like a muffler. It is fitted between the engine and the muffler, located at the part of the exhaust system. An oxygen sensor is necessarily installed beFore and after the converter. The catalytic converter works very silently throughout. catalytic converter works very silently A catalytic converter uses a catalyst which is a combination of platinum, palladium, and rhodium. A ceramic honeycomb inside a metal casing is attached with the exhaust pipe which is coated with these metals. The honeycomb structure has its advantages. It provides a maximum surface area on which several reduction and oxidation reactions can take place while using the least amount of catalyst. The device converts carbon monoxide into carbon dioxide; nitrogen oxides are broken into nitrogen and oxygen. And hydrocarbons are converted into carbon dioxide and water. Other Part Number:324236 645174 Package: Rear Left Right Compatibility Dsection: 2004-2006 Jeep Wrangler 4.0 Install: Always defer to any included instructions. The instructions provided in this article are written for general cases of catalytic converter installation. Because the exact part needed and the installation process can vary from vehicle to vehicle, the steps you’ll need to replace your vehicle’s converter may be different than the ones here. When in doubt, always follow the instructions provided with your replacement part or consult the advice of a knowledgeable mechanic. Converters have a specific direction they should flow and have an arrow for direction of exhaust flow. Insert any gaskets supplied with the new catalytic converter. Some converters, especially bolt-installed ones, will come with small, round gaskets that sit in the pipes connected to the converter to give the converter a snugger, more secure fit. If your replacement converter came with these gaskets, install them according to any provided instructions before proceeding. Put the new catalytic converter in place. Next, hold the catalytic converter in the position where it will eventually be installed. Double check to make sure it is pointed in the right direction (there should be an arrow indicating this) and that the correct side is facing down. Since its tricky to work on the converter with one hand while you hold it in place with another, for the next few steps, it can be useful to enlist a willing friend to hold the converter in place while you work or use a stand to hold it up in place. Finger-tighten nuts on the bolts. If your vehicles catalytic converter was bolted in and your replacement converter has bolt holes that match your exhaust systems, installation is usually a cinch. To start, re-insert your bolts and use your hands to manually tighten them. This makes it easier to get all of the bolts to align correctly because the looseness gives you a small degree of « wiggle room » to make minor adjustments as needed. Tighten down all the bolts. Starting on the « front » end of the converter (the end further away from the vehicles exhaust), tighten the bolts with a suitably-sized wrench. Proceed to the back end when you finish tightening the bolts on the front. Youll want your bolts to be very tight. Most exhaust leaks are caused by loose bolts, so making sure your bolts are extra tight now can save you headaches in the future. Alternatively, weld the converter into place. If you need to weld your converter into place, the process is somewhat more involved. Youll need a professional-grade welding machine (such as a MIG welder) and the proper training and expertise required to use one safely (or a friend who has these things). Dont attempt to weld your converter back into place if youre not a competent welder — you could damage your vehicle or even hurt yourself. Weld your converter into place by carefully joining it to the exhaust system pipes at either end. Be sure to create a secure, air-tight seal at each weld. If the pipes arent wide enough, you may need to heat them up and flare them to make them fit. If your pipes dont quite reach one end of your converter, you may need to weld an additional extender pipe in. Sometimes you have to do a partial weld then lower the exhaust to finish the top part of the weld. Be sure to allow your welds to cool to a safe temperature before proceeding. Screw the oxygen sensor back into place. If you originally removed one or more oxygen sensors to access your converter, replace them now. As you do, check to make sure that the attached wiring is secure and is not frayed or damaged — this can lead to inaccurate readings and even false « check engine » lights. Double-check your work. At this point, if youve done everything correctly, youre basically done. Take the opportunity to make sure one last time that the catalytic converter is connected correctly and there are no gaps or leaks at either of the connections or the oxygen sensor. If you bolted your converter in, make sure all of your bolts tight. If you welded it in, make sure your welds are sturdy and airtight. Payment WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov. PayPal preferred. Payments are expected within 7 days after the last winning auction is closed; Otherwise Unpaid Item Dispute will be filed with eBay. Shipping All domestic orders will be shipped via USPS, UPS or FedEx from our US warehouse and usually arrives to your door in about 3-5 business days. We ship the package to your shipping address in eBay instead of the one in PayPal. Please tell us your shipping address if it is different from the one in eBay. The tracking number will be given for the customer to check the shipping status online (registered or faster service only). We are not responsible for any wrong or undeliverable addresses. Please verify and update your shipping address on eBay during checkout. Returns 1.All of our brand new items come with a 60-Days money-back guarantee. 2.We define the item as defective only if it doesnt function as described, It is the buyers responsibility to understand the item description before bidding. 3.We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement. 4.We will refund the purchase price if the replac ement is not available or buyer prefers a refund and send the original item back at his/her own cost. 5.Shipping& handling cost are not refundable. 6.Man-made damage by abuse or wrong operation is not covered by this warranty. 7.No product liability insurance is assumed. 8.Refunds will be credited within 5 to 7 business days of receiving the return. When weve received and processed the return, we will refund the applicable amount minus any Recovery Fees (See Details Below) for the amount you paid for the item(s), plus any applicable sales tax. Customer Services Q: How do I pay for my purchase? A: MY store accepts PayPal. Q: When will the item be shipped out? A: This item will be shipped with 2 business day once payment completed. Q: Where is my tracking number? A: Please log on your account, click « my eBay »–> »my summary », or open your email box and find the shipping notification email. Q: How do I return an item? A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item. All rights reserved.

Frequently Asked Questions About CCIYU For 2004-06 Jeep Wrangler 4.0L Catalytic Converter Y-Pipe Kit Front Rear in My Website

enneadeband.com is the best online shopping platform where you can buy CCIYU For 2004-06 Jeep Wrangler 4.0L Catalytic Converter Y-Pipe Kit Front Rear from renowned brand(s). enneadeband.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling CCIYU For 2004-06 Jeep Wrangler 4.0L Catalytic Converter Y-Pipe Kit Front Rear on enneadeband.com?

Frequently Asked Questions About CCIYU For 2004-06 Jeep Wrangler 4.0L Catalytic Converter Y-Pipe Kit Front Rear in My Website

What are the best-selling CCIYU For 2004-06 Jeep Wrangler 4.0L Catalytic Converter Y-Pipe Kit Front Rear on enneadeband.com?

Laisser un commentaire Annuler la réponse