$163.3 Buy It Now or Best Offer
free,30-Day Returns
Seller Store
() %,
Location: Ontario, California, United States
Ships to: US,
Item: 264688806681
Condition:New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is … Read moreabout the conditionNew: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller’s listing for full details. See all condition definitionsopens in a new window or tab
Placement on Vehicle:Front, Rear, Left, Right, Upper, Lower
Type:Control Arm & Ball Joint Assembly
Universal Fitment:No
Control Arm Construction:Forged
Items Included:Mounting Hardware
Custom Bundle:Yes
Interchange Part Number:EV127 ES3004RL K8635 K8641 K8596 K8598 K80053 K80055
OE/OEM Part Number:Suspension Control Arms and Ball Joints Assembly,Tie Rod End
Superseded Part Number:Front/Rear Driver and Passenger Side Replacement
Manufacturer Warranty:10 Year
topcn-autoparts:topcn-autoparts
UPC:723610036442
Manufacturer Part Number:TA80112601P
Adjustable:Yes
Modified Item:Yes
Kit Parts Included:Control Arm,Ball Joint
Kit or Single Part:Kit
Greasable or Sealed:Greasable
OE Spec or Performance/Custom:OE Spec
Surface Finish:Polished, Rust Protected
Quantity:12 Pcs
Cross Reference Part Number:1993,1994,1995,1996,1997
Fitment:Cougar Thunderbird Ford Mercury
Features:Greasable
Cotter Pin Hole:Yes
Material:Alloy Steel
Mounting Style:Bolt-On
Finish:Coated
Feature：:ESCP
eBay 1.Fit For Ford Thunderbird 1993-1997 Mercury Cougar 1993-1997 2.Package Includes: Ball Joints Come Pre-Assembled Onto the Control Arms 1x Part# Front Right Upper Control Arm and Ball Joint – K8598 1x Part# Front Left Upper Control Arm and Ball Joint – K8596 1x Part# Front Left Lower Control Arm and Ball Joint – K80053 1x Part# Front Right Lower Control Arm and Ball Joint – K80055 2x Part# Front Outer Tie Rod End – ES3004RL 2x Part# Rear Stabilizer/Sway Bar Link – K8641 2x Part# Front Stabilizer/Sway Bar Link – K8635 2x Part# Front Inner Tie Rod End – EV127 Notes Front Suspension 12 Pieces Set Kit For 1993-1997 Ford Thunderbird Mercury Cougar 1.Fit For Ford Thunderbird 1993-1997 Mercury Cougar 1993-1997 2.Package Includes: Ball Joints Come Pre-Assembled Onto the Control Arms 1x Part# Front Right Upper Control Arm and Ball Joint – K8598 1x Part# Front Left Upper Control Arm and Ball Joint – K8596 1x Part# Front Left Lower Control Arm and Ball Joint – K80053 1x Part# Front Right Lower Control Arm and Ball Joint – K80055 2x Part# Front Outer Tie Rod End – ES3004RL 2x Part# Rear Stabilizer/Sway Bar Link – K8641 2x Part# Front Stabilizer/Sway Bar Link – K8635 2x Part# Front Inner Tie Rod End – EV127 Notes (1).Please check the fitment chart above before payment making sure all the suspension parts listed on this page are compatible with your automobile. (2).Please refer to Moog official website before narrowing down your search so as to avoid unnecessary item not as described return requests. (3).Please contact our customer services for targeted discount after all the items are received if you have reached any targeted discount thresholds, the terms of which is at the bottom of this page. If you are interested with any other suspension parts, please click and save our store. Ball Joint Replacement Guideline: If there is a knocking or clunking noise in the area of the front axle when the car is traveling over road bumps, potholes or curbs, then there is usually a defect in a component of the wheel suspension. Picture(A) The side of the front axle from which the (vibration) noise is emanating can already be determined during a test drive. The type of noise also already provides certain indications for maintenance regarding which components might be faulty. Picture(B) 1.Raise the vehicle and remove the front wheels. 2.To loosen the fastening screws and fixing nuts of the compression ball joint more easily, spray them with rust remover and allow to act for a few minutes. Picture(C) 3.Loosen the fastening screws of the broken ball joint on the control arm and remove the nuts. Picture(D) 4.Loosen and remove the fixing nut of the ball joint on the steering knuckle. Tip:If the ball stud rotates, hold the ball stud in place with a hexagon socket. Picture(E) 5.Remove the bad or worn ball joint from the control arm. 6.Loosen the compression ball joint on the steering knuckle using a suitable special tool. Picture(F) 7.Clean the cone connection. Tip:For better sealing and durability of the ball joint sleeve, a little silicone grease can be applied to the contact surface. Picture(G) 8.Insert new compression ball joint in the control arm and steering knuckle and tighten with new fixing nuts. 9.Reinstall front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer. 10.Measure the chassis and adjust it using the various holes on the compression ball joint if necessary. 11.Finally, carry out a test drive. Sway Bar Stabilizer Link Replacement Guideline: While driving, the following signs may indicate a faulty sway bar stabilizer link: (1).Rattling and thumping noises on rough roads. (2).Imprecise vehicle handling. (3).Stronger inclination of the vehicle during cornering. If the sway bar stabilizer link is found to be defective, it should be replaced as described below. Picture(A) 1.Raise vehicle and remove front wheels. Tip:Always check both stabilizer links and replace them in pairs if necessary. 2.Spray fastening nuts of the stabilizer link with rust remover and let act for a few minutes. Picture(B) 3.Loosen the lower fastening nut of the stabilizer link at the stabilizer and remove. Tip:If the ball stud also starts to turn, hold it with a suitable tool. 4.Press stabilizer link out of torsion bar. Picture(C) 5.Loosen the upper fastening nut of the stabilizer link at the suspension strut and remove it. Tip:If the ball stud also starts to turn, hold it with a suitable tool. Picture(D) 6.Press stabilizer link at suspension strut out of bracket. Picture(E) 7.Insert new stabilizer link at suspension strut. Picture(F) 8.Tighten stabilizer link at suspension strut to the tightening torque specified by the vehicle manufacturer. Tip:Secure the ball stud against twisting with a suitable tool. Picture(G) 9.Insert new stabilizer link at stabilizer. 10.Tighten stabilizer link at stabilizer to the tightening torque specified by the vehicle manufacturer. Tip:Secure the ball stud against twisting with a suitable tool. Picture(H) 11.Remount the front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer. Tip:Even if replacing the stabilizer link does not directly affect the chassis setting, we recommend checking the axle setting and adjusting if necessary after working on the suspension. 12.Conclude with a test drive. Tie-Rod End Replacement Guideline: If you feel a bump in the steering when driving over road bumps or curbs, this might be due to worn tie rod ends or inner tie rods. Clicking noises during sudden steering movements can also be symptoms of a defective tie rod. In order to determine the exact cause and replace the defective tie rod, the car must be elevated with a vehicle lift in order to be examined more closely. This useful tip applies to the exchange of tie rod ends and inner tie rods, which together form the so-called tie rod. Picture(A) Note: Cleanliness is extremely important when working on the power steering. Incorrect work and contamination can lead to leakage and, in the worst case, to failure of the steering assistance. 1.Lift the vehicle and dismount the front axle wheels. 2.Spray the fastening nut of the tie rod end with rust remover and leave it on for a few minutes. Picture(B) 3.Dismount the front underride guard. Picture(C) 4.Loosen the fastening nut from the tie rod and remove it completely. 5.Remove the tie rod end from the steering knuckle using an appropriate ball joint separator. Picture(D) 6.Remove the clamp of the bellow on the steering gear. 7.Push the bellow towards the tie rod end. Picture(E) 8.Unscrew the inner tie rod from the rack. 9.Clean the sealing face of the bellow at the steering gear. Picture(F) 10.Clean the lug of the rubber contact surface of the ball joint in the steering knuckle. Note:Always use new self-locking nuts and bolts for a reliable repair. 11.Screw the new inner tie rod into the rack and tighten it with the tightening torque that has been specified by the vehicle manufacturer. Picture(G) 12.Mount the bellow and close the clamps with the appropriate special tool. Note:Incorrect mounting of the bellow can lead to corrosion of the rack: the steering gear starts leaking which can lead to a failure in the steering assistance. Picture(H) 13.Secure the ball joint in the steering knuckle and mount the nut. Please observe the tightening torque suggested by the vehicle manufacturer. Note:During mounting, the ball stud should not turn within the ball joint. This can cause damage inside the ball joint and can lead to early failure. Tip:Secure the ball stud against twisting with a suitable tool. Picture(I) 14.Mount the front underride guard. 15.Mount the front wheels and tighten them with the tightening torque recommended by the vehicle manufacturer. 16.Align the wheels and adjust them if necessary. Observe the vehicle manufacturer specifications. 17.Perform a test drive. Note:When performing the test drive, pay special attention to the handling while cornering and listen for possible noise emission. Frequently Asked Questions (1).Do I need to replace the control arm if the bushings are worn? Because the weight of the car is transferred through the control arm two rubber bushings are fitted at the pivot point and bolted to the frame. Road conditions and driving habits can contribute to the wear of these bushings which will become worn and fall apart. These bushing can be inspected by raising the car up and looking for an irregular configuration of the rubber center of the bushing. Many control arms have the ball joint manufactured into the arm which will be replaced along with the control arm itself. When one control arm is worn it is highly advised to replace the opposing arm. (2).What happens if a ball joint breaks? When a ball joint breaks, you will hear a mysterious noise inside your car wheel. Your car tire will wear-out since your alignment will be broken, and you will feel the car getting out of control. If the ball joint breaks completely, it can be separated, and things can turn sour quickly. The wheel will stop being nice and can even steer you off the road. It can be serious. Broken ball joints will seriously affect the steering and suspension. It can even result in your wheel falling off the car. (3).What happens if I don’t replace ball joints? If you don’t want to replace your ball joints, then get ready to experience some serious issues. The old ball joints cause mysterious clunking noise or drifting steering. Once they are worn-out, it will seriously affect your steering and suspension. However, you do not need to change the ball joints if it is new. (4).Do I need to grease new ball joints? I would say it will be a wise decision if you grease your new ball joints. At least I will always grease a new one after the installation. Greasing a new ball joint will make it stronger and extend its lifetime because there is a minimal amount of grease inside. I suggest you do so after the first installation. Follow the instruction card. (5).Why should I get my tie rods inspected on a regular basis? If you don’t get your tie rods inspected on a regular basis, there are some warning signs to watch (and listen) for. If your vehicle pulls to one side while driving, or when braking, it’s possible that bad tie rods may be the culprit. Your vehicle’s tires will also show uneven wear on the inside and outside edge of the tire when there’s a tire rod issue. However, one of the most noticeable signs of tie rods going bad will be a knocking sound coming from the front end of the vehicle when you turn into a parking space, or some other low speed, tight turning situation. (6).Vibrations One of the first symptoms that your tie rods are damaged or breaking is that the steering wheel will vibrate slightly. This is especially prevalent when you are speeding up or turning. This happens because the steering wheel is losing its control over the tires, causing the steering wheel to shimmy as you drive. (7).Shaking As the tie rods become further damaged, you will start to notice that the car itself will start to shake. This happens because the tires may start to wobble without you having full control over them. Although you should take your car into a mechanic at the first sign of tie rod problems, if you experience your car shaking you could be at risk for serious tie rod damage-which can cause accidents. Take your car into a mechanic if you experience this tie rod symptom. (8).Wandering If your tie rods continue to go unchecked or unfixed, the rods can completely break. This can cause you to lose all control of your car, possibly resulting in an accident. When this occurs, the car will may « wander » as you drive. At this point, the steering wheel will have no control over the tires and the tires will start moving independently, causing the car to drift while you are driving. If this happens while you are on a freeway or busy road, you and others could be at serious risk of an accident. If you experience wandering, stop your car, call a tow truck and take your car to the nearest mechanic. (9).What are the symptoms of a bad sway bar? Some of the common symptoms of a bad sway bar bushing or sway bar links going bad are: clunking noise, rattling noise, knocking uneven noise road, lack of stability when driving and noise going over speed bumps. poor handling during turns. (10).What happens when a sway bar breaks? Because a sway bar helps the car’s suspension to put more pressure on loaded springs, a broken sway bar means that the car’s suspension will not be able to handle corners as well or as quickly. While it is possible to drive with a broken sway bar, as a precaution do not take corners with excessive speeds. Item Specifics Placement on Vehicle : Front Type : Control Arm & Ball Joint Assembly Universal Fitment : No Control Arm Construction : Forged Items Included : Mounting Hardware Custom Bundle : Yes Interchange Part Number : EV127 ES3004RL K8635 K8641 K8596 K8598 K80053 K80055 OE/OEM Part Number : Suspension Control Arms and Ball Joints Assembly,Tie Rod End Superseded Part Number : Front/Rear Driver and Passenger Side Replacement Manufacturer Warranty : 10 Year Brand : topcn-autoparts UPC : 723610036442 Manufacturer Part Number : TA80112601P Adjustable : Yes Modified Item : Yes Kit Parts Included : Control Arm,Ball Joint Kit or Single Part : Kit Greasable or Sealed : Greasable OE Spec or Performance/Custom : OE Spec Surface Finish : Polished, Rust Protected Quantity : 12 Pcs Cross Reference Part Number : 1993,1994,1995,1996,1997 Fitment : Cougar Thunderbird Ford Mercury Features : Greasable Cotter Pin Hole : Yes Material : Alloy Steel Mounting Style : Bolt-On Finish : Coated Feature： : ESCP Cross Reference Part Number : 1993,1994,1995,1996,1997 Features : Greasable Cotter Pin Hole : Yes Material : Alloy Steel Mounting Style : Bolt-On Finish : Coated Discount Targeted Discounts Terms (1).Targeted Discount Terms only apply to auto parts purchased from Topcn-autoparts, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. (2).If you have reached any targeted discount threshold(s), please contact our customer services after you received all your items. (3).Targeted Discount will be refunded from buyer’s payment, which means Topcn-autoparts won’t provide any extra targeted discounts if full refund is issued. Targeted Shipping Discount (4).Since our warehouse is located in Los Angeles, California, therefore you are qualified for extra 2% targeted shipping discount off the item sales if shipping address of your order is in California(CA), Washington(WA), Oregon(OR), Nevada(NV). If you have reached this targeted shipping discount threshold, please contact our customer services after you received all your items. Note: Item sales means your payment for the product(s) only, excluding shipping and handling charges, US internet sales taxes. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).Topcn-autoparts has the final power of interpretation of all the above Targeted Discount Terms and Procedures. Shipping WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. (1).Warehouse is located in Los Angeles, California, where local pickup transaction is temporarily not available. (2).Shipping services only cover 48 states and Washington DC in US Continental, while most of the time Alaska, Hawaii, Puerto Rico, American Samoa, U.S. Virgin Islands, Northern Marianas, Guam are not deliverable. (3).USPS PO Box, APO Army Post Office, FPO Fleet Post Office addresses are not available. (4).Global Shipping Program is temporarily not available due to the reason for package dimensions. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).Your auto parts sometimes might be shipped with two or more separated packages due to weight limitation, please keep patient with no Item Not Received claim or Return request filed until by all of your items are received. (7).Seller is required to purchase signature confirmation to be protected if a buyer reports an item not received or opens a payment dispute if the order has a total cost (including shipping costs and any taxes) of $750 or more. Warranty Items valued over $15 on eBay that include a warranty or service contract must contain additional details in seller’s listing description. 10 Year Warranty Terms and Procedures (1).The warranty terms only apply to the auto parts purchased from Topcn-autoparts, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. (2).Topcn-autoparts carries no warranty responsibilities for any auto parts removing fees, installation fees, consulting fees, labor costs, towing charges, rental car reimbursements. (3).The stated 10 year warranty is limited to only one brand new replacement for each part purchased during 10 year warranty time period. (4).Topcn-autoparts promises free replacement due to quality defects or item not as described issues within 90 calendar days from the date when buyers receive their items in the situation when buyers are willing to provide convictive proofs or professional diagnose report if required, otherwise Topcn-autoparts has the right to refuse any replacement requests. (5).Topcn-autoparts promises free replacement due to quality defects or item not as described issues after 90 calendar days from the date when buyers receive their items in the situation when buyers promise to prepay 15% of the original item sales price as postage for replacement, otherwise Topcn-autoparts has the right to refuse any replacement requests. (6).Topcn-autoparts carries no warranty responsibilities for any replacement due to car accidents, drag racing, unprofessional replacement, road hazard, disassembly. (7).Anyone who attempts to execute 10 year warranty procedures must be the original purchaser of the item(s), otherwise 10 year warranty terms void immediately. (8).Anyone who attempts to execute 10 year warranty procedures must provide screenshot of his or her original eBay order details if required, including buyer user name, shipping address, item title, item id, final sales price. (9).Topcn-autoparts has the final power of interpretation of the above 10 Year Warranty Terms and Procedures. Return (1).Most of items support 60 Days Money Back Guarantee. (2).Refunds will be credited within 2 or 3 business days after returned item(s) is received. Best Sales 2x Front Hood Gas Lift Supports Struts Shocks Springs For Dodge Ram 02-10 4364 USD 17.69 Pair Front Wheel Bearings For Chevrolet Impala Buick Pontiac Grand Prix Montana USD 62.35 2x Front Hood Lift Supports Shocks Struts For Dodge Ram 1500 2500 3500 4500 5500 USD 13.49 Upstream & Downstream Oxygen O2 02 Sensor For 2001-2005 Honda Civic 1.7L D17A7 USD 29.39 2 X Front/Rear Wheel Hub Bearing For Buick LaCrosse Century Chevy Impala Venture USD 63.53 Newly Listed 2X 2PCS Pair Set Black Car Aluminum roof Fits For 2012-2016 Honda CRV US Stock USD 96.43 Manual Mirror LED Smoke turn signal LH Side For 03-07 Ford F250-F550 Super Duty USD 66.99 Downstream Rear for 2009-2012 Honda Accord Acura TSX 2.4L Oxygen 02 O2 Sensor USD 13.99 Chrome Power Heated Puddle Signal Tow For 09-15 Dodge Ram Side View Mirrors Pair USD 138.99 Power Heated LED Signal Lamp Tow Side View Mirrors For 99-02 Chevrolet GMC Pair USD 134.99 Terms & Contact Shipping Policy Payment Policy Return Policy FAQ About Us Front Suspension 12 Pieces Set Kit For 1993-1997 Ford Thunderbird Mercury Cougar 1.Fit For Ford Thunderbird 1993-1997 Mercury Cougar 1993-1997 2.Package Includes: Ball Joints Come Pre-Assembled Onto the Control Arms 1x Part# Front Right Upper Control Arm and Ball Joint – K8598 1x Part# Front Left Upper Control Arm and Ball Joint – K8596 1x Part# Front Left Lower Control Arm and Ball Joint – K80053 1x Part# Front Right Lower Control Arm and Ball Joint – K80055 2x Part# Front Outer Tie Rod End – ES3004RL 2x Part# Rear Stabilizer/Sway Bar Link – K8641 2x Part# Front Stabilizer/Sway Bar Link – K8635 2x Part# Front Inner Tie Rod End – EV127 Notes (1).Please check the fitment chart above before payment making sure all the suspension parts listed on this page are compatible with your automobile. (2).Please refer to Moog official website before narrowing down your search so as to avoid unnecessary item not as described return requests. (3).Please contact our customer services for targeted discount after all the items are received if you have reached any targeted discount thresholds, the terms of which is at the bottom of this page. If you are interested with any other suspension parts, please click and save our store. Ball Joint Replacement Guideline: If there is a knocking or clunking noise in the area of the front axle when the car is traveling over road bumps, potholes or curbs, then there is usually a defect in a component of the wheel suspension. Picture(A) The side of the front axle from which the (vibration) noise is emanating can already be determined during a test drive. The type of noise also already provides certain indications for maintenance regarding which components might be faulty. Picture(B) 1.Raise the vehicle and remove the front wheels. 2.To loosen the fastening screws and fixing nuts of the compression ball joint more easily, spray them with rust remover and allow to act for a few minutes. Picture(C) 3.Loosen the fastening screws of the broken ball joint on the control arm and remove the nuts. Picture(D) 4.Loosen and remove the fixing nut of the ball joint on the steering knuckle. Tip:If the ball stud rotates, hold the ball stud in place with a hexagon socket. Picture(E) 5.Remove the bad or worn ball joint from the control arm. 6.Loosen the compression ball joint on the steering knuckle using a suitable special tool. Picture(F) 7.Clean the cone connection. Tip:For better sealing and durability of the ball joint sleeve, a little silicone grease can be applied to the contact surface. Picture(G) 8.Insert new compression ball joint in the control arm and steering knuckle and tighten with new fixing nuts. 9.Reinstall front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer. 10.Measure the chassis and adjust it using the various holes on the compression ball joint if necessary. 11.Finally, carry out a test drive. Sway Bar Stabilizer Link Replacement Guideline: While driving, the following signs may indicate a faulty sway bar stabilizer link: (1).Rattling and thumping noises on rough roads. (2).Imprecise vehicle handling. (3).Stronger inclination of the vehicle during cornering. If the sway bar stabilizer link is found to be defective, it should be replaced as described below. Picture(A) 1.Raise vehicle and remove front wheels. Tip:Always check both stabilizer links and replace them in pairs if necessary. 2.Spray fastening nuts of the stabilizer link with rust remover and let act for a few minutes. Picture(B) 3.Loosen the lower fastening nut of the stabilizer link at the stabilizer and remove. Tip:If the ball stud also starts to turn, hold it with a suitable tool. 4.Press stabilizer link out of torsion bar. Picture(C) 5.Loosen the upper fastening nut of the stabilizer link at the suspension strut and remove it. Tip:If the ball stud also starts to turn, hold it with a suitable tool. Picture(D) 6.Press stabilizer link at suspension strut out of bracket. Picture(E) 7.Insert new stabilizer link at suspension strut. Picture(F) 8.Tighten stabilizer link at suspension strut to the tightening torque specified by the vehicle manufacturer. Tip:Secure the ball stud against twisting with a suitable tool. Picture(G) 9.Insert new stabilizer link at stabilizer. 10.Tighten stabilizer link at stabilizer to the tightening torque specified by the vehicle manufacturer. Tip:Secure the ball stud against twisting with a suitable tool. Picture(H) 11.Remount the front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer. Tip:Even if replacing the stabilizer link does not directly affect the chassis setting, we recommend checking the axle setting and adjusting if necessary after working on the suspension. 12.Conclude with a test drive. Tie-Rod End Replacement Guideline: If you feel a bump in the steering when driving over road bumps or curbs, this might be due to worn tie rod ends or inner tie rods. Clicking noises during sudden steering movements can also be symptoms of a defective tie rod. In order to determine the exact cause and replace the defective tie rod, the car must be elevated with a vehicle lift in order to be examined more closely. This useful tip applies to the exchange of tie rod ends and inner tie rods, which together form the so-called tie rod. Picture(A) Note: Cleanliness is extremely important when working on the power steering. Incorrect work and contamination can lead to leakage and, in the worst case, to failure of the steering assistance. 1.Lift the vehicle and dismount the front axle wheels. 2.Spray the fastening nut of the tie rod end with rust remover and leave it on for a few minutes. Picture(B) 3.Dismount the front underride guard. Picture(C) 4.Loosen the fastening nut from the tie rod and remove it completely. 5.Remove the tie rod end from the steering knuckle using an appropriate ball joint separator. Picture(D) 6.Remove the clamp of the bellow on the steering gear. 7.Push the bellow towards the tie rod end. Picture(E) 8.Unscrew the inner tie rod from the rack. 9.Clean the sealing face of the bellow at the steering gear. Picture(F) 10.Clean the lug of the rubber contact surface of the ball joint in the steering knuckle. Note:Always use new self-locking nuts and bolts for a reliable repair. 11.Screw the new inner tie rod into the rack and tighten it with the tightening torque that has been specified by the vehicle manufacturer. Picture(G) 12.Mount the bellow and close the clamps with the appropriate special tool. Note:Incorrect mounting of the bellow can lead to corrosion of the rack: the steering gear starts leaking which can lead to a failure in the steering assistance. Picture(H) 13.Secure the ball joint in the steering knuckle and mount the nut. Please observe the tightening torque suggested by the vehicle manufacturer. Note:During mounting, the ball stud should not turn within the ball joint. This can cause damage inside the ball joint and can lead to early failure. Tip:Secure the ball stud against twisting with a suitable tool. Picture(I) 14.Mount the front underride guard. 15.Mount the front wheels and tighten them with the tightening torque recommended by the vehicle manufacturer. 16.Align the wheels and adjust them if necessary. Observe the vehicle manufacturer specifications. 17.Perform a test drive. Note:When performing the test drive, pay special attention to the handling while cornering and listen for possible noise emission. Frequently Asked Questions (1).Do I need to replace the control arm if the bushings are worn? Because the weight of the car is transferred through the control arm two rubber bushings are fitted at the pivot point and bolted to the frame. Road conditions and driving habits can contribute to the wear of these bushings which will become worn and fall apart. These bushing can be inspected by raising the car up and looking for an irregular configuration of the rubber center of the bushing. Many control arms have the ball joint manufactured into the arm which will be replaced along with the control arm itself. When one control arm is worn it is highly advised to replace the opposing arm. (2).What happens if a ball joint breaks? When a ball joint breaks, you will hear a mysterious noise inside your car wheel. Your car tire will wear-out since your alignment will be broken, and you will feel the car getting out of control. If the ball joint breaks completely, it can be separated, and things can turn sour quickly. The wheel will stop being nice and can even steer you off the road. It can be serious. Broken ball joints will seriously affect the steering and suspension. It can even result in your wheel falling off the car. (3).What happens if I don’t replace ball joints? If you don’t want to replace your ball joints, then get ready to experience some serious issues. The old ball joints cause mysterious clunking noise or drifting steering. Once they are worn-out, it will seriously affect your steering and suspension. However, you do not need to change the ball joints if it is new. (4).Do I need to grease new ball joints? I would say it will be a wise decision if you grease your new ball joints. At least I will always grease a new one after the installation. Greasing a new ball joint will make it stronger and extend its lifetime because there is a minimal amount of grease inside. I suggest you do so after the first installation. Follow the instruction card. (5).Why should I get my tie rods inspected on a regular basis? If you don’t get your tie rods inspected on a regular basis, there are some warning signs to watch (and listen) for. If your vehicle pulls to one side while driving, or when braking, it’s possible that bad tie rods may be the culprit. Your vehicle’s tires will also show uneven wear on the inside and outside edge of the tire when there’s a tire rod issue. However, one of the most noticeable signs of tie rods going bad will be a knocking sound coming from the front end of the vehicle when you turn into a parking space, or some other low speed, tight turning situation. (6).Vibrations One of the first symptoms that your tie rods are damaged or breaking is that the steering wheel will vibrate slightly. This is especially prevalent when you are speeding up or turning. This happens because the steering wheel is losing its control over the tires, causing the steering wheel to shimmy as you drive. (7).Shaking As the tie rods become further damaged, you will start to notice that the car itself will start to shake. This happens because the tires may start to wobble without you having full control over them. Although you should take your car into a mechanic at the first sign of tie rod problems, if you experience your car shaking you could be at risk for serious tie rod damage-which can cause accidents. Take your car into a mechanic if you experience this tie rod symptom. (8).Wandering If your tie rods continue to go unchecked or unfixed, the rods can completely break. This can cause you to lose all control of your car, possibly resulting in an accident. When this occurs, the car will may « wander » as you drive. At this point, the steering wheel will have no control over the tires and the tires will start moving independently, causing the car to drift while you are driving. If this happens while you are on a freeway or busy road, you and others could be at serious risk of an accident. If you experience wandering, stop your car, call a tow truck and take your car to the nearest mechanic. (9).What are the symptoms of a bad sway bar? Some of the common symptoms of a bad sway bar bushing or sway bar links going bad are: clunking noise, rattling noise, knocking uneven noise road, lack of stability when driving and noise going over speed bumps. poor handling during turns. (10).What happens when a sway bar breaks? Because a sway bar helps the car’s suspension to put more pressure on loaded springs, a broken sway bar means that the car’s suspension will not be able to handle corners as well or as quickly. While it is possible to drive with a broken sway bar, as a precaution do not take corners with excessive speeds. Item Specifics Placement on Vehicle : Front Type : Control Arm & Ball Joint Assembly Universal Fitment : No Control Arm Construction : Forged Items Included : Mounting Hardware Custom Bundle : Yes Interchange Part Number : EV127 ES3004RL K8635 K8641 K8596 K8598 K80053 K80055 OE/OEM Part Number : Suspension Control Arms and Ball Joints Assembly,Tie Rod End Superseded Part Number : Front/Rear Driver and Passenger Side Replacement Manufacturer Warranty : 10 Year Brand : topcn-autoparts UPC : 723610036442 Manufacturer Part Number : TA80112601P Adjustable : Yes Modified Item : Yes Kit Parts Included : Control Arm,Ball Joint Kit or Single Part : Kit Greasable or Sealed : Greasable OE Spec or Performance/Custom : OE Spec Surface Finish : Polished, Rust Protected Quantity : 12 Pcs Cross Reference Part Number : 1993,1994,1995,1996,1997 Fitment : Cougar Thunderbird Ford Mercury Features : Greasable Cotter Pin Hole : Yes Material : Alloy Steel Mounting Style : Bolt-On Finish : Coated Feature： : ESCP Cross Reference Part Number : 1993,1994,1995,1996,1997 Features : Greasable Cotter Pin Hole : Yes Material : Alloy Steel Mounting Style : Bolt-On Finish : Coated DiscountShippingWarrantyReturnFeedback Targeted Discounts Terms (1).Targeted Discount Terms only apply to auto parts purchased from Topcn-autoparts, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. (2).If you have reached any targeted discount threshold(s), please contact our customer services after you received all your items. (3).Targeted Discount will be refunded from buyer’s payment, which means Topcn-autoparts won’t provide any extra targeted discounts if full refund is issued. Targeted Shipping Discount (4).Since our warehouse is located in Los Angeles, California, therefore you are qualified for extra 2% targeted shipping discount off the item sales if shipping address of your order is in California(CA), Washington(WA), Oregon(OR), Nevada(NV). If you have reached this targeted shipping discount threshold, please contact our customer services after you received all your items. Note: Item sales means your payment for the product(s) only, excluding shipping and handling charges, US internet sales taxes. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).Topcn-autoparts has the final power of interpretation of all the above Targeted Discount Terms and Procedures. WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. (1).Warehouse is located in Los Angeles, California, where local pickup transaction is temporarily not available. (2).Shipping services only cover 48 states and Washington DC in US Continental, while most of the time Alaska, Hawaii, Puerto Rico, American Samoa, U.S. Virgin Islands, Northern Marianas, Guam are not deliverable. (3).USPS PO Box, APO Army Post Office, FPO Fleet Post Office addresses are not available. (4).Global Shipping Program is temporarily not available due to the reason for package dimensions. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).Your auto parts sometimes might be shipped with two or more separated packages due to weight limitation, please keep patient with no Item Not Received claim or Return request filed until by all of your items are received. (7).Seller is required to purchase signature confirmation to be protected if a buyer reports an item not received or opens a payment dispute if the order has a total cost (including shipping costs and any taxes) of $750 or more. Items valued over $15 on eBay that include a warranty or service contract must contain additional details in seller’s listing description. 10 Year Warranty Terms and Procedures (1).The warranty terms only apply to the auto parts purchased from Topcn-autoparts, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. (2).Topcn-autoparts carries no warranty responsibilities for any auto parts removing fees, installation fees, consulting fees, labor costs, towing charges, rental car reimbursements. (3).The stated 10 year warranty is limited to only one brand new replacement for each part purchased during 10 year warranty time period. (4).Topcn-autoparts promises free replacement due to quality defects or item not as described issues within 90 calendar days from the date when buyers receive their items in the situation when buyers are willing to provide convictive proofs or professional diagnose report if required, otherwise Topcn-autoparts has the right to refuse any replacement requests. (5).Topcn-autoparts promises free replacement due to quality defects or item not as described issues after 90 calendar days from the date when buyers receive their items in the situation when buyers promise to prepay 15% of the original item sales price as postage for replacement, otherwise Topcn-autoparts has the right to refuse any replacement requests. (6).Topcn-autoparts carries no warranty responsibilities for any replacement due to car accidents, drag racing, unprofessional replacement, road hazard, disassembly. (7).Anyone who attempts to execute 10 year warranty procedures must be the original purchaser of the item(s), otherwise 10 year warranty terms void immediately. (8).Anyone who attempts to execute 10 year warranty procedures must provide screenshot of his or her original eBay order details if required, including buyer user name, shipping address, item title, item id, final sales price. (9).Topcn-autoparts has the final power of interpretation of the above 10 Year Warranty Terms and Procedures. (1).Most of items support 60 Days Money Back Guarantee. (2).Refunds will be credited within 2 or 3 business days after returned item(s) is received. Copyright of Topcn-autoparts. All rights reserved.
Frequently Asked Questions About Front Suspension 12 Pieces Set Kit For 1993-1997 Ford Thunderbird Mercury Cougar in My Website
enneadeband.com is the best online shopping platform where you can buy Front Suspension 12 Pieces Set Kit For 1993-1997 Ford Thunderbird Mercury Cougar from renowned brand(s). enneadeband.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.
What are the best-selling Front Suspension 12 Pieces Set Kit For 1993-1997 Ford Thunderbird Mercury Cougar on enneadeband.com?
enneadeband.com helps you to shop online and delivers Armani to your doorstep. The best-selling Armani on enneadeband.com are: NEW Giorgio Armani AR5108 3003 Mens Gunmetal Rectangle Eyeglasses Frames 59/19 Emporio Armani Black Stand Collar Double Breasted Shirt, Size M Si GIORGIO ARMANI Genuine Giorgio Armani Mens 30 Pants Straight Leg Denim Jeans In Black Color Giorgio Armani~Luminous Silk Perfect Glow Flawless Foundation ~#1.5 ~ 1 oz ~NIB EMPORIO ARMANI BECAUSE IT’S YOU EDP 1.2ml .04oz x 2 PERFUME SPRAY SAMPLE VIALS Armani Exchange Skinny Slightly Distressed Jeans Size 33 Lot of 19 DIFFERENT WOMEN’s FRAGRANCE Perfume EDT/EDP Samples (.03 oz -.05 oz) NIB Giorgio Armani Lip Power Lipstick Mini Size #400 1.4g / 0.04oz A/X Armani Exchange Button Up Long Sleeve Dress Shirt Black Sz L Women’s Medium Armani Jeans Red Denim Dept. Spellout T Shirt Top Armani Exchange AX Abstract Art Logo Designer T-Shirt Men’s XL Armani Exchange Mens XL Slim Fit Spell Out Knit Color Block V-Neck T-Shirt Red GIORGIO ARMANI 0.5oz 15ml Assortment Travelers Sealed Box Giorgio Armani Sunglasses AR8146 5874/86 Tortoise w/ Blue Glass Lenses 50-21-145 Giorgio Armani Sì Fiori 100ml Women EDP Mandarin Musk Patchouli Fruity Vanilla Giorgio Armani Acqua Di Gio 4.2 fl oz Men’s Eau de Parfum $80 A|X Armani Exchange Men’s Long Sleeve Slim Fit Shirt, White, Sz S Armani Exchange Shirt Mens Medium Blue Navy Spellout Cotton Designer Retro Y2K Giorgio Armani LIP POWER LONG-LASTING MATTE 111 Nude Pink Mini Lipstick 1.4g A/X Armani Exchange Large Long Sleeve Shirt Men’s RN# 91714 Cotton CA# 32528 Emporio Armani Shirt Mens Medium Blue Underwear Base Layer Long Sleeve Tee Emporio Armani Men’s Essential Microfiber Trunk underwear Dark Teal S M L NWT Vintage 90’s ARMANI EXCHANGE JEANS Icon logo Short Sleeve t-shirt Big AX Logo NIB Giorgio Armani 5.0 Light Luminous Silk Perfect Glow Flawless Foundation Armani Exchange Jeans Men’s 32 Short Denim Distressed Straight Leg Button Fly Lot of 3: Giorgio Armani Prive Rouge Malachite Eau de Parfum 2ml*3= 6ml total $50 AX Armani Exchange Men’s Brown Graphic Logo Tee Shirt T-Shirt Size S (55328-1) Armani Exchange EJ0224 Black Jacket – Size L GIORGIO ARMANI ACQUA DI GIO PARFUM REFILLABLE SPRAY 125 ML/4.2 FL.OZ. NWT ARMANI JEANS T-SHIRT cotton crewneck blue white tiger luxury Italy M ARMANI EXCHANGE AX Logo Designer T-shirt Size Medium A|X Armani Exchange Men’s Short Sleeve Pima Cotton Crew Neck T-Shirt, Green,XXL Giorgio Armani Eau Pour Homme 3.4 oz EDT Cologne for Men New In Box Giorgio Armani My Way for Women 3.0 oz / 90ml Eau de Parfum – New Unsealed Box Giorgio Armani High Precision Retouch – #4.5 – .14 fl oz / 4.4 ml NIB A|X ARMANI EXCHANGE Men’s AX4070SF 815881 Black/Grey Polarized Sunglasses, Armani Exchange Shirt Mens Large Long Sleeve Blue Pearl Snap GIO DE BY GIORGIO ARMANI 100ML EDP CLASSIC SPRAY GIORGIO ARMANI GA830 OIR GUNMETAL EYEGLASSES RECTANGLE METAL FRAME 53-18-140 Armani Exchange Men’s Premium LS Button Up Casual Shirt Size M #28127 ARMANI EXCHANGE A|X Men’s Size Medium White Graphic Tank-Top T-Shirt NWT Lot of 3: Giorgio Armani Prive Rose d’Arabie Eau de Parfum Intense 2ml*3= 6ml Emporio Stronger With You / Giorgio Armani EDT Spray 3.4 oz (100 ml) (m) $90 A|X ARMANI EXCHANGE Men’s, Basic Side Zip Short, Black, 32 Acqua Di Gio Giorgio Armani For Men EDP 0.5 Fl Oz 15Ml. Travel Size Spray New Armani Exchange Shirt Mens Large Gray V Neck T Shirt Short Sleeve Spell Out Logo ARMANI EA7 3ZPT45 Mens Cotton T-Shirt Emporio Armani Summer Tops Navy Blue Tees $110 Armani Exchange Men’s Collegiante Stripe Sweatpant Pants Cotton White – L Armani Exchange Mens Large Button Down Shirt Designer Classic Preppy Casual Emporio Diamonds / Giorgio Armani EDT Spray 2.5 oz (m) Armani Exchange T-Shirt V-Neck Slim Fit Men’s Size XL Orange Emporio Armani White Fitted Shirt Crystal Stone Buttons UK 10 #ListingInLights Armani Exchange GRAPHIC T-SHIRT Mens Size 2XL XXL Blue V-Neck Short Sleeve Armani Exchange Shirt Men’s Small Beige Striped Long Sleeve Classic Button Up Armani Code by Giorgio Armani 2.5 oz EDT Cologne for Men Brand New MEN ACQUA DI GIO GIORGIO ARMANI EAU DE TOILETTE SAMPLE SPRAY 1.2 ML / 0.04 FL OZ Armani Collezioni Long Sleeve Button Up Shirt-Gray-Mens 45/18-100% Cotton-Italy Emporio Armani EA7 tracksuit men 8NPV60PJVRZ1200 Black Armani Collezioni Shirt Men 16.5 Purple Pink Stripe Button Up Long Sleeve Italy Armani Exchange Mens Slim Ajustee Shirt M Long Sleeve Cotton Checked Red Giorgio Armani 27 Large Eye Contour Eyeshadow Smudge Brush Armani Exchange Men’s T-Shirt Pima Quality Cotton Large Slim Fit White Emporio Armani Mens Bracelet EGS2214020 Leather Blue Men’s Armani Exchange Button Down Long Sleeve Shirt Size XL Gray Armani Exchange Men’s T-shirt Short-Sleeve V-neck Slim Fit Pima Cotton Tee Giorgio Armani Acqua Di Gio Eau De Toilette For Men Spray ~ 100 ml / 3.4 oz EMPORIO ARMANI KNIT SWEATER Cozy 46 WOOL Black Used Good Condition Armani Exchange Men’s M Gray & Purple Crew Neck Short Sleeve Graphic T-Shirt Emporio Armani Black Men’s cotton T-Shirt EA Round Neck,Size M*L*XL*XXL Men’s Armani Exchange Long Sleeve Button Down Shirt Size Medium Blue Red Stripe Giorgio Armani Luminous Silk Foundation – #6 (Golden Beige) 1oz *NIB* AX Armani Exchange Men’s Short Sleeve T-Shirt, Size-L Giorgio Armani ~ Luminous Silk Glow Blush ~ #52 Ecstasy ~ 0.12 oz ~ NIB Emporio Armani Diamonds by Giorgio Armani 2.5 oz EDT Cologne for Men New In Box Men’s short Sleeve Armani Jeans Cotton T shirt Giorgio Armani Si Fiori Eau De Parfum 1 oz 30 ml EDP Perfume Women Spray In Box Armani Exchange T-shirt Men’s Color Red Size M (NEW WITH ORIGINAL TAGS) Armani Exchange Men’s Blue Pink White Logo Design Cotton T-Shirt Sz XL A/X Armani Exchange Long Sleeve Woven Shirt, Size-M Giorgio Armani Luminous Silk Foundation, #4.25 30ml *NIB* EMPORIO ARMANI 9556 Z67 LOGO STYLISH SUITABLE FOR WORK/OFFICE ITALIAN EYEGLASSES Armani Collezioni thin white crinkled cotton shirt with gray plaid, Large Giorgio Armani ROUGE D’ARMANI MATTE Pink #506 *NEW* EMPORIO ARMANI MEN POLO T-SHIRT SHIRT TEE JERSEY ORIGINAL SIZE L LARGE Armani Exchange Graphic T Shirt V Neck Short Sleeve Black Men’s XL Armani Exchange $170 A|X J13 Mens Slim Fit LT Blue Scraped 100% Cotton Jeans 32R Armani Exchange Men Shirt Medium Blue Logo Graphic Short Sleeve V Neck Armani Exchange Fitted Palm Trees Blue Button Shirt – Medium ARMANI COLLEZIONI LUXURY MEN’S BUTTON UP SHIRT MEDIUM MADE IN ITALY HARDLY WORN! Armani Exchange Shirt Adult Small Black Waffle Knit Thermal Henley Eagle AX Mens Acqua Di Gio by Giorgio Armani 3.4 oz EDT Perfume for Women New In Box Armani Exchange Men’s Short Sleeve Gray Cotton T-Shirt w/ Logo Choose Size Armani Jeans Classic Striped Long Sleeve Shirt Size L Armani Si Passione by Giorgio Armani for Women 3.4 oz EDP Spray Brand New Armani Exchange 31R 31×32 Relaxed Fit Straight Leg Jean Dark Denim Ample Droite ARMANI Luminous Silk Perfect Glow Flawless Oil-Free Foundation 13.5, 0.60 oz ATTITUDE POUR HOMME by GIORGIO ARMANI 0.17 FL oz / 5 ML EDT Miniature In Box NEW Emporio Armani EA3083 5517 Womens Blue Rectangle Eyeglasses Frames 54/17~140 Giorgio Armani Eyeglasses Frames AR 7130 5092 Tortoise Round Full Rim 49-19-140 Mens Pullover Fleece Hoodie