Kokusan Flywheel Puller M36 X 1.5RH fits Aprilia RSV4 Tuono 1000 1100 2009-2019

$34.0 Buy It Now or Best Offer
free,30-Day Returns

Seller Store racetechelectric
(11694) 98.6%,

Location: Coaticook, Quebec
Ships to: US,
Item: 334326438054

Return shipping will be paid by:Seller
Returns Accepted:Returns Accepted
Item must be returned within:60 Days
Refund will be given as:Money back or replacement (buyer’s choice)
RMSTATOR:RMSTATOR
Warning:This is a multifit part. See description below.

Free shipping in USA Same day shipping visit our store > find parts for : ATV / UTV / SXS Motorcycles Snowmobiles Watercraft Other Menu Store Home find parts for ATV / UTV / SXS Motorcycles Snowmobiles Watercraft Other IMPORTANT – Important notice about the product.–> Kokusan Flywheel Puller 36 mm x 1.5 RH for Aprilia RSV4 1000 / 1100 Factory / RR / RF / R | Tuono V4 1000 / 1100 2009-19&nbsp KEY FEATURES&nbsp Brand new flywheel puller All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part 36 mm x 1.5 right hand male PLEASE CHECK IF YOUR MAKE/MODEL IS COMPATIBLE IN THE « FITS MODELS » TAB BEFORE BUYING All products are tested DESCRIPTION&nbsp Please note: for the listed models there are two possible flywheels : a Kokusan or a Mitsubishi. This flywheel puller will only work on Kokusan flywheels. Brand new Flywheel Puller 36 mm x 1.5 right hand male All products are tested All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part. PAcked with these technologies&nbsp –> Vehicle models fitment&nbsp Aprilia RSV 1000 Tuono V4 — 2015Aprilia RSV4 1000 Factory — 2009-2017Aprilia RSV4 1100 Factory — 2019-2020Aprilia RSV4 R 1000 — 2009-2015Aprilia RSV4 RF 1000 — 2015-2018Aprilia RSV4 RR 1000 — 2016-2019Aprilia Tuono V4 1000 — 2011-2014Aprilia Tuono V4 1100 — 2015-2020 OEM part replacement&nbsp 020913Y Specifications&nbsp Dimensions : Length: 60 mm Exterior Diameter: 47 mm Interior Diameter: 20 mm Exterior Diameter Center Housing: 37 mm instructions&nbsp Removing a Powersport Vehicle’s Flywheel / Rotor: How it Works Flywheel Pullers are very versatile engine service tools and are a must in every toolbox. Our large selection of best selling rotor and flywheel pullers fit just about any motorcycle or ATV. Flywheel pullers are very simple to use, having only an outer body to hold the flywheel and a screw to push on the crankshaft. Some are even simpler, having only a bolt to thread into the flywheel. A taper holds the flywheel or rotor and the crankshaft together. The flywheel is secured to the shaft by applying torque to the fixing bolt. An Important Component to use Many flywheel or rotor puller tools will include a small cap. This is a crankshaft thread protector, and should always be used if it is included with the puller. You slip this cap onto the end of the inner piece of the puller which presses against the tip of the crankshaft. This keeps the fine threads from being stripped or damaged while removing the flywheel or rotor. Actions to Avoid Most of the time, removing a flywheel or rotor is painless. But sometimes corrosion, over-torquing the fixing bolt, or heat-cycling can give you a hard time removing the flywheel. We too often see mechanics use a larger breaker bar or air impact tools to ease the flywheel off. These two techniques will damage the flywheel, the flywheel puller, or the crank. Avoid using them if you want to keep it cheap. Tips to break a stuck flywheel loose: Torque Wrench How do you know if it’s stuck? You simply have to set your torque wrench to 50 ft-lbs and try to ease the flywheel off. If the flywheel is not stuck, you should be able to remove it with even less torque than this. If it is stuck, don’t use more torque or you might break your wrench. Ball Peen Hammer If 50 ft-lbs does not do the trick, go fetch something like a 12 or 16 oz ball peen hammer. Hit the end of the flywheel puller with a medium blow. Many times, the shock you create will successfully remove your flywheel. Be prepared to catch the flywheel since the shock of the hammer can make the flywheel jump off. Once again, getting into that situation will be pricey. And don’t forget your safety glasses. Propane Torch The hammer is not a be-all, end-all solution. Sometimes, you will have to find something more powerful, and that’s where the propane torch comes in. As a last resort solution, the heat should expand the flywheel but not the crank, since it is too massive to expand as fast. That way, the flywheel will become looser and will come off easier. Important Security Tips: In order to not set fire to your garage, your vehicle, or yourself, certain precautions are necessary prior to heating the flywheel: Clean any oil or flammable liquids off the flywheel Make sure your work area is free of any flammable liquids and that you work in a well ventilated area Make sure to remove the gas tank, and set it aside at a safe distance Make sure the flame of your torch is focused, and heat only the center of the flywheel. This is due to the fact that some flywheels use adhesive or other fixing compounds to locate the magnets in the rim that can be damaged by concentrated heat. Here again, the wheel might fall off the crank, so be prepared to catch it. And remember that you just heated it, so make sure you can catch it without burning yourself. With these tips and techniques, you are now equipped to handle any stuck flywheel without throwing your flywheel puller at it; unless you have a habit of working with machines that have been in a lake for months! SHIPPING&nbsp We deliver 99.4% of our orders within the specified time period. If your item is not available in our main Colorado facility, we still guarantee that your order will be delivered within the specified time period. If your item is not delivered within this time period, we will offer you a 5.00$ discount on your order. This guarantee applies to shipments delivered in the 48 continental USA states, excluding PO boxes. Videos&nbsp Racetech around the world –> customer service AsK seller a question duties & taxes International Buyers: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer’s responsibility. RaceTech Electric was founded in 2011 by three motorcycle industry veterans in San Diego, CA. The group has over 20 years combined in the Motorcycle industry. Customer servicePart request About usAbout seller pageAdd seller to favorite

Frequently Asked Questions About Kokusan Flywheel Puller M36 X 1.5RH fits Aprilia RSV4 Tuono 1000 1100 2009-2019 in My Website

enneadeband.com is the best online shopping platform where you can buy Kokusan Flywheel Puller M36 X 1.5RH fits Aprilia RSV4 Tuono 1000 1100 2009-2019 from renowned brand(s). enneadeband.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling Kokusan Flywheel Puller M36 X 1.5RH fits Aprilia RSV4 Tuono 1000 1100 2009-2019 on enneadeband.com?

Frequently Asked Questions About Kokusan Flywheel Puller M36 X 1.5RH fits Aprilia RSV4 Tuono 1000 1100 2009-2019 in My Website

What are the best-selling Kokusan Flywheel Puller M36 X 1.5RH fits Aprilia RSV4 Tuono 1000 1100 2009-2019 on enneadeband.com?

Laisser un commentaire Annuler la réponse