Polk Audio RT1000i Tower Speaker Pair with Built-In Powered Subwoofers – Pair

Polk Audio RT1000i Tower Speaker Pair with Built-In Powered Subwoofers - Pair

$150.0 Buy It Now or Best Offer
free,30-Day Returns

Seller Store scossio
(138) 0.0%,

Location: Long Beach, California
Ships to: US,
Item: 156484376551

All returns accepted:ReturnsNotAccepted
Polk Audio:Polk Audio
Type:Home Theater Speaker System
System Configuration:5.1 Channel
Shape:Rectangular
Color:Black
RT1000i:RT1000i
Connectivity:Wired
MPN:RT1000i
RMS Power:250 W
Impedance:8 Ohms

Every function has been confirmed 100% working. All speakers drive and sound like new. All of the speakers themselves are in excellent condition. Cosmetic Condition: OK (the veneer is peeling in places on the base and sides).Functional Condition: Very Good. Boasting a sleek, slim silhouette, the Polk RT1000i brings deep precise bass, impressive performance, and unobtrusive, elegant design to any room. Each tower houses a built-in subwoofer (driven by a high-current 35-watt RMS amplifier), so you can enjoy home theater thrills and resounding music without losing valuable floor space to a separate powered subwoofer!The RT1000i towers showcase the exclusive speaker technologies that have made Polk famous. Polk’s best 1″ trilaminate dome tweeter produces smooth, transparent high-frequency detail. A 6-1/2″ Dynamic Balance® driver handles the midrange and upper bass frequencies with sheer precision. Another 6-1/2″ subwoofer driver within a High Velocity Compression Drive bandpass enclosure joins with Polk’s Power Port system to deliver spectacular bass response. Speed Matching technology blends the midrange and bass sections seamlessly, for effortless realism in music and movie soundtracks.Polk’s built-in high-current amplification for the subwoofer not only provides superior bass response, but also increases dynamic range and lowers distortion by reducing the load on your receiver’s amp. An independent subwoofer volume control on each tower lets you dial in the right amount of bass to match your room and preference. Finished in real black oak wood veneer.Recommended center channel speaker: Polk CS400i.Recommended surround speakers: Polk f/x 500i.Details:video-shieldedfrequency response 36-25,000 Hz (-3dB)8-ohm impedancesensitivity 90 dBhandles 250 watts35-watt RMS subwoofer amp with auto on/off per enclosurereal wood veneertextured front panel43-1/2″H x 8″W x 13-5/8″D Features & specsGeneralEnclosureBass ReflexFinishWood VeneerColorBlackTweeterDomeTweeter Size (inches)1Midrange Size (inches)6.5Woofer Size (inches)6.5Woofer CompositionPolyWoofer SurroundRubberBuilt-in Powered Sub—Dolby Atmos DriversConnector Type5-way post SpecificationsPower Range30-250Frequency Response36-25k HzSensitivity90 dBImpedance (Ohms)8Subwoofer Amp Power35FeaturesDynamic Balance: Dynamic Balance drivers are used for wide, smooth response and low distortion.High Velocity Compression Drive: The High Velocity Compression Drive is a patented subwoofer technology that employs magnetically powerful, high mass drive systems in special band pass enclosures to produce greater output with higher efficiency.Internal 6-1/2″ Powered Sub: The internal Dynamic Balance 6-1/2″ subwoofer is powered by a built-in 35 watt amplifier. There is an independent subwoofer volume control on the back panel of the speaker, along with the amp line level input and output.Blue Composite Midrange: The speaker uses a blue composite Dynamic Balance mid-bass woofer for clear, accurate midrange.Surrounds: For a smoother response and improved durability, the woofer and midrange use rubber surrounds.Tri-Laminate Tweeters: The improved Dynamic Balance Tri-Laminate tweeter has vapor deposited micro-layers of stainless steel and aluminum for clear, detailed highs.Speed Matching: Speed matching technology matches the start and decay rates of the mid/high frequency array with the subwoofer output. This results in seamless blending with precise attack, speed, and dynamic contrast.Power Port Technology: There is a downward firing port tube opening on the bottom of each speaker which is directed to a funnel-shaped power port. This venting system allows air velocity to slow gradually, vastly reducing air turbulence, and delivering greater bass efficiency than conventional ports.Pedestal: These speakers include an attached pedestal. The power port fires down onto this pedestal helping to provide deep, evenly distributed bass. There is a female thread in each bottom corner of the of the pedestal into which the speaker spikes screw. The spikes have rubber feet attached. The rubber feet may be pulled off the spikes when the speakers are being set on a carpeted floor.Auto On/Off Circuit: The auto on/off circuit turns the power amp on when a signal is sensed and turns the amplifier off a few minutes after signal is no longer received. The power switch is a two-position (auto/off) switch, that allows you to turn the subwoofer completely off or leave it in auto on/off mode.5-way Binding Posts: There are two pairs of gold plated 5-way binding posts connected by gold-plated jumpers. One pair is for the midrange and tweeter. The other pair is for the subwoofer amplifier. These speakers may be wired in two different ways:One option is to leave the terminal jumpers in place and connect speaker wires to one set of posts to deliver speaker level signal to the midrange, tweeter and sub amplifier.The second method involves removing the terminal jumpers and connecting the speaker outputs of the receiver/amplifier to the top set of posts while feeding the subwoofer amplifier with a line level signal from a preamp output (if preamp outputs are available).Power LED: There is a small green power LED located between the two grilles.Carpet Spikes: The speaker height listed in the dimensions includes spikes with rubber feet installed. Removing the rubber feet from the spikes reduces the height to 43.389″. Without using the spikes the height is 42.375″.NoteFrequency Response: The overall frequency response is 25Hz-26kHz, -3dB frequency response is 36-25kHz. Matching Center Channel (CS400i) and Surrounds (f/x300i in white) available alsoIncludes Carpet Spikes and Manuals – DOES NOT include the Bezels/Grills

Frequently Asked Questions About Polk Audio RT1000i Tower Speaker Pair with Built-In Powered Subwoofers – Pair in My Website

enneadeband.com is the best online shopping platform where you can buy Polk Audio RT1000i Tower Speaker Pair with Built-In Powered Subwoofers – Pair from renowned brand(s). enneadeband.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling Polk Audio RT1000i Tower Speaker Pair with Built-In Powered Subwoofers – Pair on enneadeband.com?

Frequently Asked Questions About Polk Audio RT1000i Tower Speaker Pair with Built-In Powered Subwoofers – Pair in My Website

What are the best-selling Polk Audio RT1000i Tower Speaker Pair with Built-In Powered Subwoofers – Pair on enneadeband.com?

Laisser un commentaire Annuler la réponse