Power Feed X-Axis 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM

$125.9 Buy It Now or Best Offer
free,30-Day Returns

Seller Store fansdealonline
(11356) 99.1%,

Location: Ontario, California
Ships to: US,
Item: 184706519316

Restocking Fee:No
Return shipping will be paid by:Seller
All returns accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money Back
Voltage:110V
Rotate speed:0-200 RPM
Torque:150 lbs
Package size:13″x8″x7″
Gross weight:6.5 kg(14.3 lb)
Warranty:Lifetime
Function:Milling
Machine Type:Milling Machine
Power Source:Electric
Control:Manual
MPN:ZCXZG0085
VEVOR:VEVOR
AS-250-150:AS-250-150

Description The machine is used for X axis,if you want to used for Y axis,a SUPPORT PLATE will be needed. Our Brand New AS-250-150 X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8″ Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First…etc. The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. Features 1. Speed adjust knob Speed can be adjust according to operator’s requirement, ranging from 0-9. 2. Jog switch Normally, jog switch should be at “FEED” position. For jog movement, just switch to « 0 » position. Kept holding the switch until it travels to requires position. Warning 1. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. 2. Make sure the power feed stops before you change the direction. 3. The switch should be in the « OFF » position when the machine is not in use or before plugging. Maintenance 1. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. 2. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). Specification Type : X-axis Model : AS-250-150 Voltage : 110 V, 60 Hz Torque : 150 lbs Rotate speed : 0-200 rpm Length : 33 cm (13 inch) Width : 20 cm (7.9 inch) Height : 18 cm (7 inch) Gross weight : 6.5 kg(14.3 lb) In The Box 1 x AS-250-150 X-Axis Power Feed for Milling Machine 1 x Set of Necessary Accessories 1 x Product Manual Features Brand new X-axis power feed for Bridgeport type milling machines Reversible and auto shut-off at end of cut 150 Lbs. torque Variable speeds Longer lifespan Effortless operation Limit switch for sensitive stop No loss of dial or hand crank Noiseless direction changes Better surface smoothness Small volume and easy installation Excellent speed control in the entire range Power table feed won’t vibrate or strain in low speed Direction control knob for easy and rapid operation Safety feature to protect transmission gear and electronic components Delivery We have Two warehouses located in CA, and NJ, and the item will be shipped from one of them according to your location, and only to eBay ADDRESS. Package handling only takes 1 business day at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, pls inform us by Email or leave ebay note if the changes are needed before we send the product. SHIPPING 1. We have Two warehouses located in CA, and NJ, and the item will be shipped from one of them, and only to eBay ADDRESS. Package handling only takes 1 business day at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, pls inform us by Email or leave ebay note if the changes are needed before we send the product.2. It is beyond our ability to change the address after we ship your item.3. Orders placed at weekend will be shipped within 2 days.4. USPS: 3-9 business days. | UPS: 2-6 business days. | FedEx: 2-6 business days.5. We only ship to the 48 states, and we do not ship to FPO or APO addresses. RETURN We accept returns. Please contact our customer service team immediately if: 1.You changed your mind and wish to request a return.2.Your product was damaged during transit.All returns must be directed through Customer Service. Please do not return or post items before obtaining instructions from us. If you do, there is a risk that your returned item may not be identifiable and accepted. Applicable freight fees and a 10% re-stocking fee will be deducted from your refund in cases where you changed your mind about your purchase and wish to return the product. This also applies to orders cancelled while in transit.We ONLY accept returns with original package. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return.We will require a picture of the damaged part for verification. The buyer will be liable for the shipping costs associated with warranty claim. WARRANTY For your peace of mind, this product comes with lifetime warranty. We value our customers and wish to make your purchase experience as enjoyable as possible. If something goes wrong with your product, please do not hesitate to contact us for assistance.Please contact us through eBay and include the original purchase information (i.e. your name , address, email and purchase receipt number). PAYMENT We accept Paypal payment only.Payment should be completed within 4 (Four) days of auction closing. Or unpaid dispute will be filed for closing auction.

Frequently Asked Questions About Power Feed X-Axis 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM in My Website

enneadeband.com is the best online shopping platform where you can buy Power Feed X-Axis 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM from renowned brand(s). enneadeband.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling Power Feed X-Axis 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM on enneadeband.com?

Frequently Asked Questions About Power Feed X-Axis 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM in My Website

What are the best-selling Power Feed X-Axis 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM on enneadeband.com?

Laisser un commentaire Annuler la réponse