Upgrade T3T4 GT3582 Red A/R .70 Cold A/R .63 Compressor Turbine Turbo Charger

$135.0 Buy It Now or Best Offer
free,30-Day Returns

Seller Store genesistec
(794) 97.2%,

Location: Hebron, Kentucky
Ships to: US,
Item: 325266643824

Return shipping will be paid by:Buyer
Returns Accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money Back
Features:Individual
Manufacturer Warranty:Yes
Turbine Inducer/Exducer:68mm/62.4mm
Compress Inlet Size(Air intake):4 inch (103.5mm)
California Prop 65 Warning:California Prop 65 Warning
Note2:This is universal application turbo,,so modification might be required for some vehicles
Item Width:240mm
compressor wheel/blades material:Cast aluminium
Vintage Part:No
Compressor A/R:0.7
OE/OEM Part Number:Turbo,Turbocharger,Turbo Charger,Turbolader,Turbocompresor,Turbine,Universal Turbo, turbosuperchargers,Aftermarket Turbo,turbos, gt 35 turbo, gt35 turbo, gt3582 turbo, t3 flange,turbo t3, gt3582, for Nissan SR20DET, RB20/25, ,for Honda B16/B18, K20, H22, F22 Engines
Compressor Outlet Size:2.5 inch (63.6mm)
Performance Part:No
Item Length:260mm
Superseded Part Number:for Toyota 1JZ/2JZ, 7MGTE.
Country/Region of Manufacture:N/A
Turbine A/R:0.63
Universal Fitment:Yes
Compressor Inducer/Exducer:61.5mm/81.5mm
GT35 GT3582 Universal:GT35 GT3582 Universal
Interchange Part Number:T3 Flange, GT3582, GT35 Turbo with gaskets
PSI:22
Turbine Wheel material:K418 alloy,high oxidation stability, resistance up to 900℃
Water Thread Size:W8*1.25
Important Notice:Package Included: Just like the picture,Professional installation required
Flange (Turbo Exhaust):T3 Flange
Compressor housing material:ZL104 aluminum
Finish:Matte
Turbine housing material:Ductile iron QT450-10,resistant up to 700℃
Product Advantages::2 years after-sales warranty,Factory Quality Assurance,Increase Motivation,Reduce Fuel Consumption
Notice:This is aftermarket replcement part.
Cooling Type:Water and Oil Cooled
Manufacturer Part Number:01XNL2
genesistec:genesistec
Color:Red
Oil Thread Size:W14*1.5
Horse Power:Capable of Boosting Horse Power up to 600HP
Type:Turbo Charger
Items Included:Adapter

Application： Bigger HP Applications, perfect for all 4/6 cylinder and 2.5L-6.0L engines Capable of Boosting Horse Power up to 600HP for Honda B16/B18, K20, H22, F22 Engines for Nissan SR20DET, RB20/25, for Toyota 1JZ/2JZ, 7MGTE. Also Works for Twin Turbos Applications for GM for SBC, for LSx, for Ford 4.6, 5.0 Engines Note :This is universal application turbo, so modification might be required for some vehicles. Please confirm that there is enough space in your car to install this turbo before purchasing. Product Specific： Turbine Side: Exhaust Inlet Flange: T3 Flange Exhaust Outlet Flange: 4-Bolt Turbine Trim: 84.2 Turbine A/R: 0.63 Turbine Inducer Diameter: 68mm Turbine Exducer Diameter: 62.4mm Compressor Side: Compressor Trim: 56.9 Compressor A/R: 0.7 Compressor Inducer Diameter: 61.5mm Compressor Exducer Diameter: 81.5mm Compress Inlet Size(Air intake): 4 inch (103.5mm) Compressor Outlet Size: 2.5 inch (63.6mm) Bearing Type: Floating/Journal Bearing Thrust bearing: 270 degree Cooling Type: Water + Oil Cooling Horse Power: Up to 600HP Turbo Type: Individual Wastegate: External Wastegate Oil feed/inlet: M10*7/16-24 Oil drian/outlet: 2*M8*1.25 Water inlet/outlet: M14* 1.5 Maximum PSI: 22 Condition: 100% Brand New Accessories: You will get exactly as shown as picture above Pakage Size: 26 x 25 x 23 cm Pakage Weight: 8350g Product Material: 1. Turbine housing : iron QT450-10 shell 2. Steel Turbine Wheel: K418 alloy 3. Compressor housing: ZL104 aluminum 4. compressor wheel/blades: Cast aluminium Package included 1 xTurbocharger 2 x Flange gaskets 2 x Oil feed/drain gaskets Features: *Product Material 1. Turbine housing: Ductile iron QT450-10 – temperature resistant up to 700℃ 2. Steel turbine wheel: K418 alloy – high oxidation stability and resistance up to 900℃ 3. Compressor housing: ZL104 aluminum with lightweight 4. Compressor wheel/blades: Cast aluminium blades – superior air tightness & corrosion resistance *Product Performance 1. Cost-effective turbo increase 20-40% power for your car 2. Rich experience in turbo production and own factory 3. High-Speed oil seal ring and Precision clearance 4. Built for durability and strength * Technology Advantage: 1. 100% balancing Test by TURBOTECHNICS VSR3 2. G3-min-Flow VNT Turbo testing 3. Advanced Actuator Tester/Programmer Note: * Replace, repair or reconnect air cleaner element per manufacturer’s manual to avoid compressor wheel damage. * Make sure the oil drain line is lower than the turbo itself. * Gasoline car must install a water cooling device to avoid overheating. * Ensure exhaust outlet are well sealed by welding * The degree of modification of the universal turbo depends on your individual vehicle.Professional installation is highly recommended. * This Turbo is not vehicle specific. Please check the specifications and verify compatibility prior to placing your order. * Before installing the new turbocharger, the cause that led to the failure of the turbo must be analyzed and eliminated (e.g. insufficient oil supply, foreign bodies in the intake area, crankcase ventilation without function, etc.)! Tips before installing: 1.Replace the air filter: if the if the air filter is not replaced may cause the compressor wheel damage. 2.Replace the engine oil: Because floating bearing and turbocharger will be damaged by impurities in the old oil. 3.After large overhaul, the engine cannot be replaced with a new turbocharger because there are too much impurities in oil after overhauling which will damage the replacement turbocharger immediately. Please run the old turbocharger for 7-10 days and then replace to new turbocharger and new engine oil. Q&A Q：Does this come with everything you need to install? A：It’s just the turbo and gaskets. You’ll need an oil feed and drain lines, turbo manifold, boost controller(if you want to run higher boost than wastegate pressures), an ecu tune, piping and intercooler. There’s probably some other things I’m missing but those are most of the major components you’ll need Q：What is the oil feed thread and pitch, and what is the cold side exit/inlet diameters for the gt35 version? What is the cold side inlet size ？ A：the oil feed thread size : 16/7-18 fitting; the cold side inlet size: M14X1.5ShippingNoticeAbout usShipping1. We only ship to the confirmed address provided by PayPal. please make sure your address in PayPal after you paid us.2. Also leave your contact TEL NO for us that needed for ship company.3. Don’t give us your P O box address which we can’t send by express.4. Parts will be shipped out within 1 working days ,we will contact you and make sure with you some details if your order have problems before shipping out.5. We ship by these ways usually:DHL,TNT,UPS,FEDEX,EMS,E-packing,China post Air,we supply worldwide shippment with tracking no.Notice1. The price and shipping cost do not include import duties, taxes or charges, buyer will be responsible for import customs duties,taxes or charges if they have as per the rules of buyer’s country,please inquire these additional costs from your country’s customs before bidding/buying.2. A professional installation by a mechanic is needed, the warranty does not include inappropriate installation or use.3. If return and exchange item for any reason, buyers pay for return shipping charge. Please see our return policy for more information.4. If refund for any reason, buyer need to return the item firstly, buyer pay return shipping cost, and we only refund the cost of item,the shipping cost happened will not be refunded.5. If buyer buy wrong item by mistake, we will not refund. So please check and confirm the item which you want to buy can match your car or turbobefore purchasing. If you can not confirm if the item can fit your car or turbo, please feel free to contact us.About usWe adopt the same quality control equipment as original manufacturing to make high-precision turbocharger and it’ s parts. In order to consistently produce high-quality products, we control our quality strictly by various balance machines that was imported from Germany, measuring machines and inspection devices. Consequently, we help customers to save time and guarantee the high performance and durability of turbochargers.

Frequently Asked Questions About Upgrade T3T4 GT3582 Red A/R .70 Cold A/R .63 Compressor Turbine Turbo Charger in My Website

enneadeband.com is the best online shopping platform where you can buy Upgrade T3T4 GT3582 Red A/R .70 Cold A/R .63 Compressor Turbine Turbo Charger from renowned brand(s). enneadeband.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling Upgrade T3T4 GT3582 Red A/R .70 Cold A/R .63 Compressor Turbine Turbo Charger on enneadeband.com?

Frequently Asked Questions About Upgrade T3T4 GT3582 Red A/R .70 Cold A/R .63 Compressor Turbine Turbo Charger in My Website

What are the best-selling Upgrade T3T4 GT3582 Red A/R .70 Cold A/R .63 Compressor Turbine Turbo Charger on enneadeband.com?

Laisser un commentaire Annuler la réponse